MELT BLOWN DEPTH FILTER CARTRIDGE

  • 100% Polypropylene with no fiber release provides superior chemical and bacterial resistance while meeting standards for Food and Beverage
  • Thermally bonded multi-layer filtration media with graded pore densities to promote consistent flow rates while maintaining filtration performance
  • Complies with USP XX III and FDA CFR Title 21 regulations for use with Food and Beverage applications

The Baleen Max F.E. RJPP series of high quality thermally bonded depth filter cartridges are specially designed and manufactured utilizing melt blown Polypropylene (PP), allowing for a wide range of chemical resistance and a high level of temperature resistance. The filtration media consists of multiple layers of melt blown depth media with incrementally smaller micron ratings going from the outside towards the center of the cartridge, allowing for optimum flow rates and a higher contaminant capacity while maintaining high product performance in the reduction of sand, silt, rust, and other sediment.

Applications

These filters can be used in a multitude of applications such as but not limited to:

  • Residential Under Sink and Whole House System Sediment Removal
  • Commercial and Industrial Sediment Removal
  • Preparation and Production of Chemicals and Solvents
  • Pre-filtration for Reverse Osmosis (RO)
  • Electric Components
  • Plating
  • Parts Washing
  • Pulp and Paper Manufacturing
  • Food and Beverage Manufacturing
  • Oil and Gas Preparation and Production
  • Rinse Water

Part Number / Ordering Legend

Click to Enlarge (opens in new window)

Specifications

Dimensions

Outside Diameter: 2.5”(63mm), 4.5”(115mm), custom sizes available upon request)
Inner Diameter: 1.1”(28mm), 1.2”(30mm)
Length: 9.75”(248mm), 9.87”(251mm), 10”(254mm), 20”(508mm), 30”(762mm), 40”(1013mm), 50”(1270), 60”(1524mm)

Material

Filter Media: Pure Polypropylene
End Caps: Pure Polypropylene
Core: Pure Polypropylene
Gasket/O-Ring: Silicone, EPDM, NBR, Viton

Performance

Micron Rating: 1μm, 3μm, 5μm, 10μm, 25μm, 50μm, 75m, 100μm, 150μm
Max Differential Temperature: 2.0 Bar @ 69.8°F (21°C)
Max Operating Temperature: 179°F (82°C)

Click to Enlarge (opens in new window)

Click to Enlarge (opens in new window)

Click here to get a quote